# After upgrading to 1.34, my relay1 is down and gLiveView wont start

**URL:** <https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756>\
**Category:** Community Technical Support\
**Tags:** cardano\
**Created:** [1 March 2022 14:50 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756 "2022-03-01T14:50:51Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [1 March 2022 14:50 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/1 "2022-03-01T14:50:51Z")

</div>

Hello,

I have tried to upgrade to version 1.34.0 on one of my relay node.  
Since then my node is down (pooltool, etc) and gLiveView won’t start.

I have the following logs on “topologyUpdater\_lastresult.json”

```auto
{ "resultcode": "502", "datetime":"2022-03-01 14:40:53", "clientIp": "35.216.132.227", "msg": "invalid blockNo []" }
{ "resultcode": "502", "datetime":"2022-03-01 14:40:57", "clientIp": "35.216.132.227", "msg": "invalid blockNo []" }

```

and when i launch the gLiveView i get this error “Connection to node lost, retrying (2/3)!”, etc

I haven’t touch my topology file but before doing anything anyone has an advise ?  
Pool ticker DODO

Thanks for your support

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [1 March 2022 14:55 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/2 "2022-03-01T14:55:13Z")

</div>

type `sudo systemctl status cnode`  
with glive it’s a known issue … you must wait for next glive update

---

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [1 March 2022 14:59 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/3 "2022-03-01T14:59:02Z")

</div>

udo systemctl status cardano-node  
● cardano-node.service - Cardano node service  
Loaded: loaded (/etc/systemd/system/cardano-node.service; enabled; vendor preset: enabled)  
Active: active (running) since Tue 2022-03-01 15:30:50 CET; 27min ago  
Main PID: 409 (startRelayNode1)  
Tasks: 10 (limit: 19191)  
Memory: 14.9G  
CGroup: /system.slice/cardano-node.service  
├─409 /bin/bash /home/dodopool\_io/cardano-my-node/startRelayNode1.sh  
└─499 /usr/local/bin/cardano-node run --topology /home/dodopool\_io/cardano-my-node/mainnet-topology.json --databas\>  
Mar 01 15:57:37 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:37.11 UTC] Validated chunk no.\>  
Mar 01 15:57:37 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:37.11 UTC] Validating chunk no\>  
Mar 01 15:57:40 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:40.31 UTC] Validated chunk no.\>  
Mar 01 15:57:40 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:40.31 UTC] Validating chunk no\>  
Mar 01 15:57:44 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:44.33 UTC] Validated chunk no.\>  
Mar 01 15:57:44 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:44.33 UTC] Validating chunk no\>  
Mar 01 15:57:47 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:47.15 UTC] Validated chunk no.\>  
Mar 01 15:57:47 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:47.15 UTC] Validating chunk no\>  
Mar 01 15:57:50 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:50.08 UTC] Validated chunk no.\>  
Mar 01 15:57:50 relay1 cardano-node[499]: [relay1:cardano.node.ChainDB:Info:5] [2022-03-01 14:57:50.08 UTC] Validating chunk no

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [1 March 2022 15:01 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/4 "2022-03-01T15:01:12Z")

</div>

ok, now press `top` do u see the CPU ~100% for cardano node?  
if yes then u must wait for the node to start (perhaps the DB is resyncing… anyway you can see the status of the node if u press any key on glive when u see that error.

---

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [1 March 2022 15:02 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/5 "2022-03-01T15:02:36Z")

</div>

yes indeed 101.7%. So does it means that this new release needs more CPU capacity ?

I notice as you said in your last comment when i press any key on gLiveView I can see the status.  
I will wait for synch but I do not know why my relay has been seen down.  
I will post the gLiveView capture once it is synched.

Do you know if there is a delay on pooltool before being seen up ?

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [1 March 2022 15:04 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/6 "2022-03-01T15:04:48Z")

</div>

no, it means the relay didn’t started yet… on glive you will see starting…

---

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [1 March 2022 15:49 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/7 "2022-03-01T15:49:45Z")

</div>

Well when i press a key after launching gLiveView i can see now that my relay is in sych (Tip diif is allright).  
I have tested that my relay port is open and everything look ok.

But i still see my node down on all public monitoring plateform (pooltool, adapools, etc.).

Do you know if it is a matter of time ?

![image](https://us1.discourse-cdn.com/flex023/uploads/cardano/original/3X/5/c/5cd71059a4f4191ca63582a9328466f8d38742d7.png)

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [1 March 2022 15:53 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/8 "2022-03-01T15:53:13Z")

</div>

Yes, u should see it online … just wait more time

---

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [2 March 2022 07:02 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/9 "2022-03-02T07:02:06Z")

</div>

Hi Alex,

Thank You!  
I confirm that after few hours my relay is seen online on all public platform.  
I appreciate your help on my request.

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [2 March 2022 07:06 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/10 "2022-03-02T07:06:27Z")

</div>

you are welcome, anytime 🍻

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [2 March 2022 10:09 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/11 "2022-03-02T10:09:41Z")

</div>

glive is working again, update to the latest version

![image](https://us1.discourse-cdn.com/flex023/uploads/cardano/original/3X/7/9/79f4159d6f60c4a3993dae399bec4278e6769778.png)

---

<div class="post-metadata">

**Author:** ![Frederic\_Noyer](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/frederic_noyer/32/32052_2.png) [@Frederic\_Noyer](https://forum.cardano.org/u/Frederic_Noyer)\
**Post date:** [2 March 2022 16:10 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/12 "2022-03-02T16:10:01Z")

</div>

Thanks Alex!

---

<div class="post-metadata">

**Author:** ![Abobolaispool](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/abobolaispool/32/39665_2.png) [@Abobolaispool](https://forum.cardano.org/u/Abobolaispool)\
**Post date:** [3 March 2022 04:42 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/13 "2022-03-03T04:42:55Z")

</div>

the new version on the BP missed slot check is showing 99.9%

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [3 March 2022 06:07 UTC](https://forum.cardano.org/t/after-upgrading-to-1-34-my-relay1-is-down-and-gliveview-wont-start/96756/14 "2022-03-03T06:07:39Z")

</div>

Ok, and is increasing or not?
