# gLiveView P2P disabled

**URL:** <https://forum.cardano.org/t/gliveview-p2p-disabled/90317>\
**Category:** Setup a Stake Pool\
**Created:** [29 December 2021 15:49 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317 "2021-12-29T15:49:28Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![franc](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/franc/32/67070_2.png) [@franc](https://forum.cardano.org/u/franc)\
**Post date:** [29 December 2021 15:49 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/1 "2021-12-29T15:49:28Z")

</div>

Hi everyone, there was an update for the gLiveView env and I noticed that where it says CONNECTIONS, P2P says disabled. Before I could just check Peer Analysis and it showed Incoming and Outgoing connections, now I can only see Incoming connections. So I can no longer see Outgoing peers, which I checked regularly just to be sure everything is running smoothly. I already checked with

```auto
sudo netstat -plant

```

and my BP connection is fine too. Was it announced for gLiveView to not show Outgoing connections anymore? Is P2P → disabled just fine?  
Thanks!

here is the img  
 ![image](https://us1.discourse-cdn.com/flex023/uploads/cardano/original/3X/c/1/c1842a97bb3e76984bc1701ff832543dc4fdd6c8.png)

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [29 December 2021 16:05 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/2 "2021-12-29T16:05:51Z")

</div>

I see IN and OUT peers in your image;  
P2P is in testing phase and soln it will be deployed on mainnet

---

<div class="post-metadata">

**Author:** ![franc](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/franc/32/67070_2.png) [@franc](https://forum.cardano.org/u/franc)\
**Post date:** [29 December 2021 18:30 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/3 "2021-12-29T18:30:49Z")

</div>

Oh okay, didn’t know P2P was in testing phase. Still bummed that I can no longer see live outgoing connections though.

Thanks for the reply

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [29 December 2021 18:39 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/4 "2021-12-29T18:39:49Z")

</div>

what do u mean… U have IN(2) and OUT(14) peers on glive

---

<div class="post-metadata">

**Author:** ![franc](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/franc/32/67070_2.png) [@franc](https://forum.cardano.org/u/franc)\
**Post date:** [29 December 2021 18:53 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/5 "2021-12-29T18:53:47Z")

</div>

I mean where I could see other relay’s addresses, geolocation, ping, etc.

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [29 December 2021 19:00 UTC](https://forum.cardano.org/t/gliveview-p2p-disabled/90317/6 "2021-12-29T19:00:55Z")

</div>

Press P on glive and u should be able to see those infos  
If not, replace the current glive with the old one gLiveView.sh\_bkpxxx

For eg mv gLiveView.sh\_bkpxxxx gLiveView.sh

start again glive and press N