# Guild Live View in and out who should be listed on in?

**URL:** <https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166>\
**Category:** Operate a Stake Pool\
**Created:** [16 December 2021 19:34 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166 "2021-12-16T19:34:39Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 19:34 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/1 "2021-12-16T19:34:39Z")

</div>

Hello,

i just create a pull, and i install Guild Live View, i have at the moment my block producer node and my relay, in same network,

my question is, on relay Guild Live View, where i should see my block producer node? Only on out connection or also at in ?

Because at the moment i see only in out connection as first of the list, and the same also is in block producer node.

That is correct or in the relay node, i should see my block producer node on the in peers ?

Thank you.

And sorry if it sound stupid but i need to know if i make all correct.

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [16 December 2021 19:37 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/2 "2021-12-16T19:37:11Z")

</div>

yes, both nodes should be seen as IN/OUT peers, if u see the BP only in OUT peers it means that the relay connected to BP but the BP didn’t connected to Relay

try from BP

telnet Relay\_IP Relay\_port

do u see connected?

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 19:58 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/3 "2021-12-16T19:58:58Z")

</div>

Thank you for your answer,

this is what i get

Trying 217.133.194.127…  
Connected to 217.133.194.127.  
Escape character is ‘^]’.  
Connection closed by foreign host.

and same is if i use my local ip

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [16 December 2021 20:06 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/4 "2021-12-16T20:06:19Z")

</div>

then check the fw… on ur relay did u opened the port to allow connections from any? U are using the default port 6000 right?

and also are the nodes 100% synced?

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 20:10 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/5 "2021-12-16T20:10:37Z")

</div>

Yes all Sync , and firewall is set correctly.

Maybe I did something wrong with the port.

As in block producer I use 6000 and in relay node 3001

I will try to check configuration and forwarding better . And let you know the results.thannks

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [16 December 2021 20:22 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/6 "2021-12-16T20:22:58Z")

</div>

And did u started the node with port 3001? Can u share the glive?

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 21:12 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/7 "2021-12-16T21:12:29Z")

</div>

![16396891005434940304081436205162](https://us1.discourse-cdn.com/flex023/uploads/cardano/original/3X/e/5/e5a37f2b6b2d5a6451458a90b64f366e390f25bd.jpeg)

Really node

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 21:13 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/8 "2021-12-16T21:13:25Z")

</div>

![16396891591315306545165236108429](https://us1.discourse-cdn.com/flex023/uploads/cardano/original/3X/1/3/13514131943e801dd787b5ae5a3417eec5e824a4.jpeg)

Blockproducer

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 21:16 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/9 "2021-12-16T21:16:01Z")

</div>

This is after your tips.  
But still only on producer node I can see in and out

And in the relay node only on out, but not blockproducer on in peers

---

<div class="post-metadata">

**Author:** ![Alexd1985](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/alexd1985/32/23759_2.png) [@Alexd1985](https://forum.cardano.org/u/Alexd1985)\
**Post date:** [16 December 2021 21:39 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/10 "2021-12-16T21:39:33Z")

</div>

But u said u used 3001 for Relay but the relay is started with port 6000 so, in order to solve the issue u have 2 options:

- go to BP topology file and set the port 6000 for Relay (according to glive output the Relay is running on port 6000) save the file and restart the node
- go to Relay and start it with port 3001 (u will need to edit the cnode\_port from env file - replace 6000 with 3001, u will need to edit the startBlockProducingNode.sh script - replace 6000 with 3001, edit also the topologyUpdater.sh script - replace 6000 with 3001; restart the relay

---

<div class="post-metadata">

**Author:** ![wowstore](https://sea1.discourse-cdn.com/flex023/user_avatar/forum.cardano.org/wowstore/32/48022_2.png) [@wowstore](https://forum.cardano.org/u/wowstore)\
**Post date:** [16 December 2021 22:39 UTC](https://forum.cardano.org/t/guild-live-view-in-and-out-who-should-be-listed-on-in/89166/11 "2021-12-16T22:39:02Z")

</div>

Thank you.

You help me a lot.

It looks great now.

I will let you know
